Bob, W0HTH, presents this month's Ham Morsels

Steve Brightman, KI5ENW, U.S. Technical Representative for SDRPlay presents an Introduction to Software Defined Radio

Battery selection, design, and build. Learn about battery packs for portable and fixed operation. Speaker: Dann St. Pierre, VE6TD/KU7R

The Club watched the YouTube Presentation: Topic: The Search for Amelia Earhart From Her Last Radio Transmissions, a YouTube Video presented by Rod Blocksom, KØDAS to the Radio Amateur Training Planning and Activities Committee (RATPAC)

Disclaimer:  This was not a club video presentation, just a re-watching of Rod's youtube presentation.

Vince d'Eon, VE6LK Topic: Go-Kit Building - Design Considerations (via Zoom) Vince is a regular on the Ham Radio Workbench podcast. From his website https://ve6lk.com and his banter on the podcast his knowledge and passion for Ham Radio is evident.

Kyle Krieg, AAØZ, Kyle is a YouTuber creating Ham Radio content on a wide variety of topics. Over the past year he has done numerous videos on Node-RED, a programming tool for wiring together hardware devices (think radio gear) in new and interesting ways. He'll share with us how Node-RED can easily be used as a shack accessory or to integrate a remote operating capability. Only basic software skills are required to get started!

Speaker: Desiree Baccus, N3DEZ, Administrative Specialist for the Office of the Center Director - NASA Ames Research Center Desiree, a recent transplant to Colorado, is already active on the Colorado Federal Executive Board serving as Vice Chair for their Emergency Preparedness Council. She is currently serving as Co-Chair of the NASA On The Air (NOTA) 2022 event. Come and hear her enthusiasm for all things Amateur Radio.

Learn about Software Defined Radio (SDR) with the objective of learning enough to get started with using and experimenting. You can expect this to be more interactive and, potentially, a deeper dive into the topic than we would do in a typical club meeting presentation. Don't be intimidated by the subject. You don't need an engineering degree or an Extra Class License